Produkte

Briquetting Presses MMP Series

Performance: 30 - 200 kg/h

With the hydraulic briquetting presses of the series MMP, wood chips, dust and chips,also from various other materials such as straw, miscanthus, peat, paper, cardboard, plastics, etc., can be pressed into dimensionally stable, cylindrical briquettes. The machines are CE-compliant and are characterized by a solid construction, which guarantees a consistent briquette quality in continuous operation.

The briquettes are produced exclusively with extremely high pressure without the addition of binders. The volume of the starting material can be reduced by up to 90% depending on the material. The granule size of the starting material has to be smaller than 2cm. The maximum material moisture content must not exceed 18% Atro. The standard silo has a filling volume of one cubic meter. Silos with larger filling volumes or special containers built as a substructure under an existing suction and filter system or as a complete disposal unit with dedusting plants –approved for interior installations - are also available.

The briquetting presses of the series MMP are designed for the production of briquettes from heterogeneous starting material, e.g. dust, woodchips etc. The stroke length is monitored via a special weighing system installed in the main press cylinder. The built-in Siemens PLC control evaluates the data and controls the briquette length over the duration of the pre-compressing compactor screw (too long briquettes means less material, too short briquettes means more material). The optimal briquette length is 50 mm. The PLC controller also provides many additional information, e.g. temperature of hydraulic oil, number of manufactured briquettes, operating hours counter, fault analysis, etc. The energy efficient hydraulic system with a tank volume of 100 - 160 liters allows long operating hours without an additional cooling unit.

The following advantages are obtained with the production of briquettes:

• Creation of a valuable material from a residual material

• Reduction of the volume by up to 90%

• Cost savings in storage and transport

• Efficient disposal

• Profitable sales of the briquettes

• Reduction of the risk of fire and explosion caused by dust binding

• 2.1 kg of wood briquettes corresponds to a heating value of 1 liter of heating oil

Special features:

• Siemens PLC control with touchscreen panel

• Data analysis and error analysis

• Integrated path measurement system installed in main press cylinder

• Smoothcushioned running cylinders

• Manual function of all cylinders

• Pre-compressing screw

• Permanent running of the agitator with separate control

• Oil deficiency sensor and shutdown of the machine if the minimum level is not reached

Technical Details:

technical data

Briquettingpresses RUF for square briquettes

Performance: appr. 100 - 1000 kg/h

The hydraulic briquetting presses produces dimensionally stable, rectangular briquettes from a wide range of waste material with a maximal moisture content of 14 %. The machine can process not only shavings from all types of wood, but also dust and sawdust from fiberboards, as well as grinding dust, peat, straw, miscanthus, reeds, turf, paper, cardboard, containers, plastics or textile fibres, tobacco, and even ferrous and nonferrous metals. Built up in a sturdy construction, the briquettingpress guarantees constant briquette quality in continuous operation. The machine is designed for nonstop operation.

The pressing works by means of hydraulic pressure without any additives or glue. The volume of the basic material can be reduced by up to 90 %. To suit specific customer requirements, mütek delivers the hopper along with the machine, if there is no hopper or screw conveyor with which the briquetting press could be connected. It is further possible to fit the machine with a special tank in order to combine it with a dust extraction system and filter plant and so composing a complete disposal unit. The PLC control system integrated in the machine allows the exact determination of weight and length and controls the briquette uniformity. The briquette standard dimensions are 150 x 60 mm. The briquette length can be varied from 40 to 105 mm. By modulation of the length, the briquette weight can be set up. Usually the material is fed via a screw conveyor or a ventilator, which is controlled by a control cabinet integrated in the press. The material feeding can be automated using a level indicator.

The briquetting presses for square briquettes are also available with a big-bag unit or packaging table. Via a packaging drawer the briquettes can be packed in plastic bags into packages of each up to 10 kg. Welding tongs attached to the table hermetically seal the packages. mütek also offers automated packaging machines. We look forward to your request and will gladly create an individual offer.

Anlage RUF1

Benefits of Briquetting:

• Generating resource from waste
• Briquetting reduces waste volumes by up to 90 %
• Savings on storage and transport costs
• Reduction of waste disposal costs
• Profitable selling
• Reduction in the danger of fires and explosion by means of reducing dust emissions
• 2,1 kg briquettes correspond the heating value of 1 liter oil

Technical Data:

RUF TD EN

* other Models on request.
(The kg/h throughput capacities stated in the table above refer to a bulk density of 200kg per cubic meter)

Video:

[creativecontactform id="8"]

Briquettingpresses MUP Series

Performance: appr. 300 - 520 kg/h

The hydraulic briquetting presses of the MUP series produces dimensionally stable, rectangular briquettes from a wide range of waste material with a maximal moisture content of 14 %. The MUP machine can process not only shavings from all types of wood, but also dust and sawdust from fiberboards, as well as grinding dust, peat, straw, miscanthus, reeds, turf, paper, cardboard, containers, plastics or textile fibres, tobacco, and even nonferrous metals. Built up in a sturdy construction, the MUP guarantees constant briquette quality in continuous operation. The machine is designed for nonstop operation.

The pressing works by means of hydraulic pressure without any additives or glue. The volume of the basic material can be reduced by up to 90 %. To suit specific customer requirements, mütek delivers the hopper along with the machine, if there is no hopper or screw conveyor with which the briquetting press could be connected. It is further possible to fit the MUP 520 with a special tank in order to combine it with a dust extraction system and filter plant and so composing a complete disposal unit. The PLC control system integrated in the machine allows the exact determination of weight and length and controls the briquette uniformity. The briquette standard dimensions are 150 x 60 mm. The briquette length can be varied from 40 to 105 mm. By modulation of the length, the briquette weight can be set up. Usually the material is fed via a screw conveyor or a ventilator, which is controlled by a control cabinet integrated in the press. The material feeding can be automated using a level indicator.

MUP 520 briquetting presses are also available with a big-bag unit or packaging table. Via a packaging drawer the briquettes can be packed in plastic bags into packages of each up to 10 kg. Welding tongs attached to the table hermetically seal the packages. mütek also offers automated packaging machines. We look forward to your request and will gladly create an individual offer.

Benefits of Briquetting:

Technical Data:

Technical Data2

(The kg/h throughput capacities stated in the table above refer to a bulk density of 200kg per cubic meter)

Video:

[creativecontactform id="8"]

Briquetting Presses MFP Series

Performance: 5 - 30 kg/h

The hydraulic briquetting presses of our MFP series press various woodworking residues such as sawdust, wood shavings and milling chips as well as grinding dust into dimensionally stable, rectangular briquettes measuring 35 x 35 mm. Depending on the starting raw material, the length of the briquettes varies between 6 and 50 mm. It can also be pressed other materials such as paper dust, straw or miscanthus.

Our MFP briquetting presses are characterized by their compact, well-engineered and solid construction. Our machines can work in continuous operation. The maximum moisture content of the material to be pressed must not exceed 15% atro. The pressing process is carried out without the addition of binders - solely by the hydraulic pressing pressure. The volume can be reduced by up to 90% (depending on the material).

The briquetting presses of our MFP series are standardely built with hydraulic tank, drive unit, material silo and control unit. The material silo is 680 mm in diameter and has a filling volume of approx. 0.4 cubic meters. The control system is equipped with a motor protection switch and an on / off switch. The machines are standardely delivered in 400 V -50 Hz - 3 ph but can be supplied in 230 V for a small additional charge. Thanks to the innovative "Silent" hydraulic pump, the machines are extremely quiet. The sound pressure level is less than 62 decibels!

As an accessory, a briquette line can be delivered to the briquetting presses of our MFP series with which the briquettes can be transported into bags, cartons or in a briquette storage room.

The production of briquettes has the following advantages:

• Creation of a valuable substance from a residue material

• Reduction of volume by up to 90%

• Cost savings for storage and transport

• Cheap disposal

• Profitable sale

• Reduction of the risk of fire and explosion due to dust binding

• 2.1 kg wood briquettes correspond to a calorific value of 1 liter fuel oil